Participants will work with Neil Turner to:
Neil will demonstrate the marking out procedure for the embellishment using the indexing facility on the headstock. Describe other jigs you can make to assist the marking out process. Neil will also explain the tools required to complete the embellishment, differences between Dremels, Air tools and Micro motor Machines. Why he use a Micro motor Machine. Neil will discuss and demonstrate the range of burs required to complete each embellishment step. Which works best and why. Sanding options: the use of various sanding discs, small barrel and flapper sanders to achieve the result I’m looking for. The finishes he would apply to the finished box, what may work. Turning Tool Requirement PPE Bowl Gouge – small to medium Spindle Gouge - small to medium Round Nose Scraper – 12mm wide Small Round Carbide Scraper (if available) Skew Chisel – 13mm – 25mm wide Roughing Gouge Parting Tool (Any other tool you think you don’t need) Super glue, sanding grits 120-400 Vernier Gauge Thick Rubber Band – 65mm dia Embellishment Dremel/ Micro Motor/ Air Tool (any of these will suffice) With the provision to hold a 3/32 and 1/8 bur Burs supplied by Neil Turner: - (Barrel bur 5mm or 5mm Round bur) - (Knife cutter bur 4mm) - (Cup bur 1mm) Paper Ruler Pencil Eraser